Uniden UWG 400 El manual del propietario

1For more exciting new products please visit our website:Australia: www.uniden.com.auNew Zealand: www.uniden.co.nzUWG 400

10CameraCall buttonSpeakerSensor lightCamera LensLEDMicrophoneRegister buttonIndicators FunctionSpeaker Transmits sound from the monitor (intercom).Se

11Power On/O To power on/off the Receiver, press and hold the Power button.Registration1. Press the Call button on the Camera.2. Then press and hol

12Monitoring (Optional)In the standby mode, press the Camera button on the ReceiverWhen one Camera is registered, the LCD on the Receiver will display

13Using the MENUVolumeThis MENU option allows you to adjust the volume during a call.1. Press MENU to display the menu.2. Press the relevant Up and

14Key ToneWhen you press a key on the Receiver, it is accompanied with a key tone.1. Press MENU to display the menu.2. Press the relevant Up and Dow

15Default SettingThis option allows you to reset the Receiver to the default factory settings.1. Press MENU to display the menu.2. Press the relevan

16 # Either use the batteries or connect the Camera to the power supply. Do not use the options together. # You may need to connect to the DC Power/Do

17Set Unlock TimePress and hold the Accept button and Unlock button, on the Receiver, at the same time for 5 seconds in the standby mode, then the LCD

18TECHNICAL SPECIFICATIONCameraTransmit Frequency Range 2.4GHz - 2.4835GHzModulation Type GFSK/FSKTransmitting distance Up to 150m (open space)Image s

19Terms of Warranty: Uniden Aust/NZ warrants to the original retail purchaser only that the UWG400 (“the Product”), will be free from defects in mater

2This manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual

20Statement of Remedy: If the Product is found not to conform to this warranty as stated above, the Warrantor, at its discretion, will either repair t

21

22

23

24©2013 Uniden Australia Pty Ltd/Uniden New Zealand Limited

3• If any item is missing or damaged, contact your place of purchase immediately. Never use damaged products!• Need help? Get answers at our website

4CONTENTSIMPORTANT SAFETY INSTRUCTIONS ...2WHAT’S IN THE BOX? ...

5ReceiverThe rechargeable Ni-MH batteries (AAA size, 1.2V, 800mAh) come with your Receiver. Install the batteries before use.To replace the battery co

6Camera1. Install two C size batteries (not supplied) into the battery compartment.2. Fit in the screws to secure the battery cover.InstallationConn

7 # Choose a proper location for the Camera. Be sure to consider the average height of visitors.1. Align the rain cover and the screws with the drill

8ReceiverChargerGETTING TO KNOW YOUR VIDEO INTERCOMCharge PinsAntennaLock SwitchAcceptMENULCDMicrophonePower/EndUnlock (Optional)Navigation KeysCamera

9Keys/Indicators What it doesMENU• In standby: open the menu.• In the Menu or any list: select the highlighted item. Accept Accepts the incoming cal