Uniden UBC355XLT Guía para resolver problemas descargar pdf (Pagina 17)

4. Mount the scanner to the bracket only after the wiring has

been connected to the rear panel.

Permanently Connecting the Mobile Power Supply

CAUTION: If you are not experienced in connecting

accessories to the vehicle fuse box, please see your

automotive dealer for advice on proper installation.

1. Check the vehicle battery connections to determine which

battery terminal (positive or negative) is grounded to the

engine block or chassis. Most of today’s vehicles use a

negative ground. If your vehicle has a negative ground, follow

Steps 2 and 3. Otherwise, skip to the Caution in Step 3.

2. Connect the RED wire of the DC power cord to the accessory

contact in your vehicle’s +13.8 VDC fuse box.

3. Connect the BLACK wire of the DC power cord to the negative

side of the vehicle (usually the chassis).

Caution: In vehicles with a positive ground, the RED wire

connects to the chassis and the BLACK wire connects to

the accessory contact in the fuse box.

4. Insert the DC plug into the DC 13.8V jack on the back panel.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 67 68

Sin comentarios

Uniden UBC355XLT Guía para resolver problemas Pagina 17