Uniden BC246T Guía de usuario descargar pdf (Pagina 55)

ScanControl

One Program, Multiple Scanners, Made in USA

• Name – The alphanumeric name assigned to the tone out settings. The first 16 characters of this

string are stored in the radio when the search ranges are programmed.

• Frequency – The frequency setting for the tone out.

• Mod – The reception mode (modulation) for the tone out. You can choose from the list of

available modes or select Auto to have the radio select the mode.

• Att – Checkbox to turn on or off Attenuation for each tone out.

• Delay – The delay value (in seconds) for the tone out.

• Alert – The Alert value (OFF, 1 – 9) for the tone out.

• Alert Lvl – The Alert Level (AUTO, 1 – 15) for the tone out.

• Tone A – The Tone A audible frequency (in Hz) for the tone out.

• Dur A – Not yet implemented in BR330T or BCD396T.

• Tone B – The Tone B audible frequency (in Hz) for the tone out.

• Dur B – Not yet implemented in BR330T or BCD396T.

• Gap - Not yet implemented in BR330T or BCD396T.

• Rec - Checkbox to turn on or off Record Out mode for each tone out.

• Operations Controls

o Load Settings – Loads all 10 tone out settings from the scanner’s radio memory into the

ScanControl Memory Area.

o Prog Settings – Programs all 10 tone out settings into the scanner’s radio memory.

o Reset Settings – Resets all 10 tone out settings to their default settings in the

ScanControl Memory Area. NOTE: This function DOES NOT clear the data for the

tone out settings in the scanner’s radio memory.

o Help Button - Click to open this Help file.

o Close Button – Click to close the Edit Custom Search Ranges Screen and return to the

Main Control Screen.

Edit Location Alerts Settings Screen

(BCT15, BCD996T)

The Edit Location Alerts Settings Screen allows programming and loading of GPS Location Alerts used

in the BCT15 and BCD996T. These values are stored in the ScanControl Memory Area and saved in

the ScanControl data file. Location Alerts are specific geographic locations you program into the

scanner that are then used during GPS scanning mode. The scanner signals an alert (audible tone) when

the GPS interface tells the scanner the vehicle is within the location parameters as defined in the

Location Alert data.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 85 86

Sin comentarios

Uniden BC246T Guía de usuario Pagina 55