Uniden UWG700 El manual del propietario descargar pdf (Pagina 11)

Connecting the Camera to an Optional Electronic Door Strike

You can connect the camera to an electronic door strike (door strike not included with the UWG700 ). This

allows you to unlock your door by pressing the key icon on the monitor. The door strike must be able to be

triggered by a 15V DC power supply to be compatible with the UWG700.

Note: The Door Strike feature is not available when the Camera is using batteries.

If the two wires are not already connected to your door strike:

Using the instruction manual provided with your door strike, connect the positive and negative wires 1.

to their proper terminals on the door strike.

Connecting Door Strike to Camera

Using a flat head screwdriver, loosen the screw to the door strike positive connection slot.2.

Insert the positive wire from the door strike into the positive door strike slot on the camera, make sure 3.

it is completely inserted.

Tighten the screw above the positive connection for the door strike and this will lock the wire into 4.

place.

Pull lightly on the wire to make sure it is secure.5.

Repeat the above steps for the negative wire for your door strike and negative connection on the back 6.

of the camera. The door strike button will trigger the door strike for 5 seconds.

Note: The UWG700 provides a positive 15V DC trigger for 5 seconds. For any issues regarding your

optional electronic door strike refer to the instructions that came with it.

UWG700 OM.indd 11 28/9/11 9:41:39 AM

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Sin comentarios

Uniden UWG700 El manual del propietario Pagina 11